HINOTSU - TITAN KEVLAR 7X7 WIRE ASSIST JIGGING LINE

Hinotsu Titan Kevlar 7×7 Wire Assist Jigging Line

This is raw material for building your own single and twin assist hooks, and it is the armoured end of that range. Inside a tightly braided Kevlar sheath runs a 7×7 stainless-steel wire core — seven bundles of seven fine wires, laid up the way wire rope is, rather than one solid strand. That is the whole point: it puts steel in the load path so teeth cannot shear the assist, while staying flexible enough to fold over a hook shank and take a whipped finish. The Kevlar outside does the abrasion work and gives a surface to tie against; the wire underneath is what a mackerel's teeth meet. Low stretch transfers the lift straight to the hook, and low memory lets a finished rig recover its shape after storage. Five metres per spool, five breaking strengths, two colours.

When you need a wire core, and what it costs you. Ordinary PE and Kevlar assist cord is abrasion resistant, not cut resistant — it survives a rasping mouth and gives up to a clean bite. Put steel in the core when the fish on the mark can cut: tenggiri and Spanish mackerel, wahoo, barracuda, dogtooth tuna and sharks; and on deep drops where you cannot inspect and re-tie between fish. The price is real. A wire-cored assist is stiffer than the same rating in the AL series, so the hook swings less freely and sits more rigidly against the jig — fine on heavy vertical and speed jigging, a genuine handicap on light and slow-pitch rigs where a soft cord lets the hook flutter with the jig. It is also harder to whip neatly, unforgiving if you kink it, and dearer per metre. Fish it where teeth are the limiting factor, not everywhere.

The Kevlar AL series covers the same job without steel — AL-1 for general tying, AL-2 with a fluorocarbon core for slow pitch, AL-3 with a soft PE core for free hook movement. The Titan is what you reach for when those keep coming back cut.

Key Features

• 7×7 stainless-steel wire core — fine strands give reinforcement with more flexibility than solid wire
• Tightly braided Kevlar outer layer for abrasion resistance and a durable tying surface
• Low stretch, transferring pulling force directly to the hook
• Bite resistance for sharp-toothed predators that cut standard assist cord
• Low memory, and flexible enough to loop for single hooks, twin hooks and solid-ring systems
• Five breaking strengths from 110 lb to 320 lb
• 5 m spool — material for several custom assist assemblies

How To Rig It

• Setting the length — Roughly one third to one half of the jig's body length, ring to hook bend. Keep wire-cored rigs at the short end; the added stiffness makes a long assist wrap the leader.
• Building the loop — Fold the cord back over the hook shank, whip it down with assist thread and seal the wrap. Do not force a tight radius; a kinked strand is a broken strand waiting to happen.
• Single or twin — A single gives the cleanest jig action and fewest tangles. A twin raises the hook-up rate on swiping fish; tie the two at slightly different lengths so they cannot foul.
• Front or rear mount — Front (nose) mount for vertical and speed jigging, where fish take the head of a rising jig; rear or both ends for slow pitch, though on a slow-pitch jig use this cord only when teeth force it.
• Still check it — The wire stops a bite-off; it does not make the rig permanent. Re-tie when the Kevlar sheath is furred or a strand has kinked.

Target Species By Region

• Southeast Asia — The reason the cord exists here: tenggiri (Spanish mackerel), barracuda, wahoo and dogtooth tuna on reef and wreck marks off Rompin and eastern Indonesia, alongside gerepoh (giant trevally).
• North America — King mackerel, wahoo, barracuda and blackfin tuna on Gulf and Atlantic wrecks; amberjack where a jig sees teeth as well as structure.
• Japan & East Asia — Tachiuo and sawara, both notorious for cutting assist cord, plus buri and hiramasa on heavy vertical jigging.
• Australia, Middle East & Europe — Spanish mackerel, wahoo and yellowtail kingfish on Australian reefs; queenfish and barracuda in the Gulf; tope and bluefish on European wreck marks.

Specifications

Construction: braided Kevlar sheath over a 7×7 stainless-steel wire core, on 5 m spools.

Recommended Pairing

• 110–170 lb for light and mid-weight jigs on PE 2–4, mackerel and barracuda ground
• 220–250 lb for standard vertical jigging on PE 4–6, matched to a solid ring and heavy split ring
• 320 lb for heavy jigs, locked drag and dogtooth or shark ground on PE 6–8
• Hang the finished assist on a solid ring, never directly on the split ring seam
• Pair with assist hooks sized so the point sits clear of the jig body, plus assist thread