AMERICAN TACKLE - NANOLITE TITANIUM RING LOCK SPIN GUIDE 64NIRLS FISHI

American Tackle Nanolite Titanium Ring Lock Spin Guide 64NIRLS

This is a rod-building component, not a finished rod: a single American Tackle 64NIRLS guide, sold individually in seven ring sizes from 8 mm to 40 mm. The S in the code marks the spinning frame. Line leaves a fixed spinning spool in expanding coils rather than straight off a level spool, so the first guide must stand high and open wide enough to gather that cone before it slaps the frame — which is why this range runs to 40 mm while the 64 casting models stop at 20 mm. NI is the top ring option: a titanium ring on the Nanolite frame in the Ring Lock seat.

Key Features

Spinning frame — high standing height, wide first ring for the cone off a fixed spool
Titanium ring, the highest of the three 64 spinning ring options
Ring Lock pressure-fit ring seat with enlarged glue reservoir (US Patent D627,032)
Seven ring sizes: 8, 12, 16, 20, 25, 30 and 40 mm, sold singly

Choosing Between The Three Spinning Rings

64NIRLS — titanium — Lightest, and most resistant to the grooving braid cuts into softer ring materials. For dedicated PE rods living in salt.
64TTRLS — TICH frame, Nanolite ring, stainless — The middle step, and the default for a mixed braid and mono build.
64NCRLS — chrome Nanolite, stainless — The entry point: a first build, a spare set, or a rod that mostly runs mono.

How To Build With It

Sizing the stripper — Match the first guide to the spool: 40 mm and 30 mm for 6000–14000 reels, 25 mm for 3000–5000. Too small a stripper costs distance on every cast.
Reduce fast, then run small — Drop through 25 and 20 mm over the first third of the blank, then hold 16, 12 and 8 mm to the tip.
Spend the titanium where it works — Wear concentrates at the stripper and first reduction, where line changes angle under load. If the whole train is not going titanium, put it there.
Check the knot, then the spacing — Pull your actual FG or PR connection through the chosen stripper by hand; a knot that clicks will cost a cast. Static test the taped train under a hanging weight, then seal in two thin epoxy coats.

Target Species By Region

Southeast Asia — Popping and jigging spin builds on PE for giant trevally (GT), queenfish, barramundi (siakap) and giant snakehead (toman), where braid contact and salt are constant.
North America — Surf and inshore spin builds for striped bass and redfish, plus West Coast rockfish and salmon blanks.
Japan & East Asia — Shore jigging and offshore casting blanks for buri, kanpachi and hiramasa, where a 40 mm stripper suits high-speed PE.
Australia, Middle East & Europe — Kingfish and mulloway spin rods, Gulf popping blanks, and European pike and sea bass builds.

Specifications

Ring Size	SKU	Typical Position
8 mm	64NIRLS8	Running guide
12 mm	64NIRLS12	Running guide
16 mm	64NIRLS16	Mid guide
20 mm	64NIRLS20	Reduction guide
25 mm	64NIRLS25	Stripper guide
30 mm	64NIRLS30	Stripper guide
40 mm	64NIRLS40	Stripper guide

Recommended Pairing

Medium to heavy spinning blanks carrying 3000–14000 size reels
PE 1–8 braid with a fluorocarbon or nylon shock leader matched to the class
Size A or D thread and two-part epoxy; match the tip top to the 8 mm running guide

AMERICAN TACKLE - NANOLITE TITANIUM RING LOCK SPIN GUIDE 64NIRLS FISHING ACCESSORIES SPAREPART