American TackleSKU: 64BGSG8

AMERICAN TACKLE - STANDUP BR GUIDE 64BGSG BLACK/GOLD GUIDE FISHING ROD GUIDE

$5.00 USD
Size: #8mm
AMERICAN TACKLE - STANDUP BR GUIDE 64BGSG BLACK/GOLD GUIDE FISHING ROD GUIDE
$5.00 USD
Size: #8mm
Item code: 64BGSG8

American Tackle Standup BR Guide 64BGSG Black/Gold

The 64BGSG is the standup guide of the 64 series: a black and gold frame sold singly in six sizes from 8 mm to 30 mm, built for the short, thick blanks used in standup big-game fishing. A standup rod is fought from a harness with the angler leaning back, so load runs vertically down a deeply bent blank at close to full drag, and it stays there. Nothing about that resembles casting. Guides for it need a heavy frame on a wide, long foot, because the wrap has to hold against pressure that never lets up. The ladder skipping 10 mm fits a standup train: a few large frames to take line off the reel, then a short run of small ones to the tip.

Key Features

  • Standup frame profile for harness-fought big-game blanks
  • Black and gold finish, matching classic game-rod component sets
  • Six ring sizes: 8, 12, 16, 20, 25 and 30 mm
  • Ladder skips 10 mm, giving a deliberate step from 12 mm down to 8 mm
  • Model 64BGSG, with SKUs coded by ring size

How To Build With It

  • Placing the first two frames — Set the 30 mm and 25 mm on the butt section and check clearance with the reel in a fighting position, not flat on the bench.
  • Short, steep reduction — Move from 20 mm to 16 mm and then 12 mm over a short span, and run only the 8 mm frames on the last stretch to the tip.
  • Testing at fighting curve — Static-test with enough weight to bend the blank to its real fighting arc. A standup blank spends its working life near that curve, so guide spacing should be judged there.
  • Wrapping for full drag — Wrap both feet the whole length of the ramp with no gap at the toe, then finish in two thin epoxy coats; a short wrap is the first thing to lift.

Specifications

Ring Size SKU Typical Position
8 mm 64BGSG8 Tip-end running guide
12 mm 64BGSG12 Running guide
16 mm 64BGSG16 Mid guide
20 mm 64BGSG20 Reduction guide
25 mm 64BGSG25 Stripper guide
30 mm 64BGSG30 Stripper guide

Sold as single guides, black and gold finish throughout. No 10 mm size is offered in this model.

Recommended Pairing

  • Short standup and heavy jigging blanks carrying lever-drag reels in the 30 to 80 lb class
  • PE 6–12 braid or 50–100 lb monofilament with a heavy fluorocarbon or nylon leader
  • Size D thread and two-part rod-building epoxy, with a gold trim wrap to match the frame finish