American TackleSKU: 64NCRLA6

AMERICAN TACKLE - RING LOCK A FRAME GUIDE SS CHROME NANO RING 64NCRLA FISHING GUIDE

$2.90 USD
Size: #6mm
AMERICAN TACKLE - RING LOCK A FRAME GUIDE SS CHROME NANO RING 64NCRLA FISHING GUIDE
$2.90 USD
Size: #6mm
Item code: 64NCRLA6

American Tackle Ring Lock A Frame Guide SS Chrome Nano Ring 64NCRLA

This is the A frame member of the 64 Ring Lock family, with a Nano ring in a chrome stainless frame. An A frame guide has two feet that rise and cross into a single apex, so the ring is braced from both sides instead of hanging off one leg. That triangle is what resists sideways twist: when a fish runs across the boat, or a heavy sinker swings on the drop, the load is split between two wrap positions on the blank rather than concentrated at one. It is the frame to pick when the rod will be pulled from angles it was never cast at. The ring sits in American Tackle's patented Ring Lock seat (US Patent D627,032), a pressure-fit ring in an enlarged glue reservoir. Eight sizes are stocked, 6 mm to 30 mm.

Key Features

  • A frame (double foot, crossed leg) construction for resistance to lateral twist
  • Nano ring — the lighter of the two ring materials American Tackle uses in this range
  • Chrome-finished stainless frame
  • Ring Lock pressure-fit ring seat with enlarged glue reservoir (US Patent D627,032)
  • Eight ring sizes: 6, 8, 10, 12, 16, 20, 25 and 30 mm
  • Model 64NCRLA, sold as individual guides, SKUs coded by ring size

How To Build With It

  • Where the A frame earns its place — Use it on blanks that get side-loaded: boat rods, jigging and popping builds, heavy shore casters. Single-foot guides suit a rod that only bends in one plane.
  • Wrapping two feet — File both feet to a long, thin taper so thread climbs the ramp without a step. Check the guide sits flat with no rocking, and wrap each foot separately rather than bridging.
  • Reduction from a 30 mm stripper — Run 30 to 25 to 20 to 16 mm over the first third of the blank, then hold 12, 10, 8 and 6 mm to the tip. Dropping two sizes at a jump piles friction into one guide.
  • Static test before epoxy — Tape the train, hang a weight from the tip, and shift guides until the line follows the curve with no flat spot. Seal with two thin coats of two-part rod-building epoxy.

Target Species By Region

  • Southeast Asia — Boat casting and jigging builds for giant trevally, queenfish and grouper, plus heavy toman and barramundi (siakap) rods where a fish dives under a boat or a snag.
  • North America — Musky and striper boat rods, inshore builds for redfish and black drum, and light offshore casting sticks.
  • Japan & East Asia — Shore jigging and light popping blanks for hirasuzuki and small kingfish, loaded hard and sideways off rock ledges.
  • Australia, Middle East & Europe — Barramundi and mangrove jack boat rods, Gulf inshore builds, and European pike, zander and catfish rods on heavy braid.

Specifications

Ring Size SKU Typical Position
6 mm 64NCRLA6 Running guide
8 mm 64NCRLA8 Running guide
10 mm 64NCRLA10 Mid guide
12 mm 64NCRLA12 Reduction guide
16 mm 64NCRLA16 Reduction guide
20 mm 64NCRLA20 Stripper guide
25 mm 64NCRLA25 Large stripper guide
30 mm 64NCRLA30 Large stripper guide

Nano ring, chrome stainless frame, all eight sizes. Sold as individual guides.

Recommended Pairing

  • Medium-heavy to heavy casting, boat and jigging blanks; 200 to 400 size baitcasters or 4000 to 8000 size spinning reels
  • PE 2 to PE 6 braid with a fluorocarbon or nylon leader joined by an FG or PR knot
  • Size D thread, two-part rod-building epoxy, and a matching chrome tip top